www.edgecs.com
412
Concrete Tools & Products
Spokane, WA 509-535-9841
Billings, MT 406-248-7196
Yakima, WA 509-248-1144
Gillette, WY 307-682-8522
HUSQVARNA
Cut-n-Break
Concrete Saw
K 760
•
Ideal for window and door
openings where you don’t want
overcutting at the corners
•
Deep cutting up to 16”; cuts pipes in pipe trenches, grooves for
cabling, expansion joints and crack repair
•
Excellent for cutting when burying signal cables
•
Specially developed, twin 9” blades provide high cutting speed
and power
•
Active Air Filtration™, centrifugal air cleaning, extends product life
and service intervals
•
SmartCarb™, a built-in automatic filter compensation, maintains
high power and lowers fuel consumption
•
EasyStart™ provides 50% easier starts
•
DuraStarter™ reduces wear on the starter
•
Easy view fuel indicator shows the fuel level in the tank
•
Air-cooled 2-stroke engine
•
Fuel indicator in the tank
•
Easy-adjust blade guard
•
Wet kit
•
One set of Cut-n-Break blades included
•
Designed for wet cutting only
HUSQVARNA
Cut-n-Break
Concrete Saw
K 3000
•
Efficient electric cutter with conve-
nient method for cutting up to 16” deep
•
An excellent choice for flush cutting, i.e. cutting tight against walls
and floors
•
Well suited for indoor use and smaller jobs where you want to
avoid overcutting at the corners
•
Ideal for cutting pipes in trenches, grooves for cabling, expansion
joints and for crack renovation
•
The Cut-n-Break method allows 16” deep cuts at a very low tool
cost
•
Specially developed, twin 9” blades provide high cutting speed
and power
•
The ergonomic front handle facilitates both vertical and horizontal
cutting
•
The convenient, patented design of the rear handle makes
operation easier
•
Adjustable blade guard enables flush cutting
•
Elgard™, the advanced electronic overload protection system,
varies the rotation speed to warn of an approaching overload
•
Electronic Softstart™ provides starting with normal, slow-acting
fuses
•
Generously dimensioned miter gear provides high durability,
minimal power loss and low noise levels
•
One set of Cut-n-Break blades included
•
Simple blade change
•
Wet kit
HUSQVARNA
Cut-n-Break Blades
•
PREL 10 CnB (shown) is for
cutting cured concrete with hard
to medium-hard aggregate and
has a U-shaped segment design
which improves cooling and
slurry transportation, for better
blade speed
•
PREL 35 CnB is a general
purpose blade that will cut hard
material such as river rock,
granite, heavily reinforced
concrete, mica, precast panels, marble, quartz, trap rock, flint rock,
and concrete over 6,000 psi tensile strength
•
PREL 70 CnB cuts concrete block, green concrete, limestone, lava
rock, slaterock, shale, and sandstone; it is also suitable to cut
through very abrasive, softer material - this blade has an excellent
speed and life in all abrasive concrete
•
The Cut-n-Break blade sets have a depth of 16”, for wet cutting
only
•
The total segment height for these sets is .295” diamond depth
•
Sold as a pair
HUSQVARNA
Electric Cutoff Saw
An electric power cutter that enables
clean dry cutting without dust or
water. The vacuum unit provides
superior dust collection, making this
machine a market leader. Unlike
other electric cutters, the blade rotates forward, cutting into the
material efficiently and with minimal strain on the user The K 3000
Vac also has Elgard™ which warns of an approaching overload.
•
Generously dimensioned miter gear provides high durability,
minimal power loss and low noise levels
•
DEX, the optional new Dust Extinguisher System that gives
cleaner cutting with less water usage and slurry
•
Unlike other electric cutters, the blade on the K 3000 Vac
rotates forward, cutting into the material efficiently and with minimal
strain on the operator
•
Electronic Softstart provides starting with normal, slow acting
fuses
•
Pulling rotation reduces the risk of sticking and kickback
•
The convenient, patented design of the rear handle makes
operation easier
•
Voltage: 230 / 120 / 110V
•
Rated current: 12/15/20A
•
Rated input: 2700/1800/2200W
•
Blade diameter: 14 inch
•
Max cutting depth: 4.5 inch
•
Vibrations front handle: 3.5m/s2
•
Vibrations rear handle: 3.5m/s2
•
Soundpower level, guaranteed: (LWA) 105 dB(A)
•
Sound pressure level at operators ear: 95 dB(A)
Item # Blade (in.) Power (hp)
PRK 760
9
5
Item #
Cutting Depth
(in.)
Electric
Motor (volt)
Rated Output
(watt)
PRK 3000
9
16
120
Item #
PREL 10 CnB
PREL 35 CnB
PREL 70 CnB
Item #
Motor
Blade
Max Depth of Cut
(in.)
PRK3000 VAC 15 Amp /120 Volt
14”
4
¹⁄₂
