Simpson Hangers » Simpson
SIMPSON STRONG TIE

BP Bearing Plates

• Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections

• The BP 1/2 - 3 and BP 5/8 x 3 are 3” x 3” bearing plates that meet the latest requirements of the IRC and IBC; these plate washers are available un-coated or with a HDG coating

• The BP5/8SKT uses SDS 1/4” x 1-1/2” screws to provide lateral resistance when 5/8” diameter sill holes are over-drilled (screws are provided)

• The shear capacity of the connection and the sill/anchor bolt shall be determined by the Designer for each installation

• Finish: BP5/8S - Galvanized; BP 7/8 - 2 - Zinc Plated; BP - None. BP’s may be ordered in HDG
Scroll down for full product description

Item # ThicknessUnit Of
Measure
 Material
List for Quote
Expand Table to Show All Columns
SNBP1[3/8] Ea. Add
SNBP1/2[3/16] Ea. Add
SNBP1/2-33 ga. Ea. Add
SNBP3/4[5/16] Ea. Add
SNBP3/4-33 ga. Ea. Add
SNBP3/8-2[3/16] Ea. Add
SNBP5/8[1/4] Ea. Add
SNBP5/8-2[3/16] Ea. Add
SNBP5/8-33 ga. Ea. Add
SNBP5/8SKT3ga. Ea. Add
SNBP7/8[5/16] Ea. Add
SNBP7/8-2[3/8] Ea. Add
Item Specifications
x

Item # ThicknessW (in.)L (in.)Bolt Dia.Unit Of
Measure
 Material
List for Quote
SNBP1[3/8]3[1/2]3[1/2]1 Ea. Add
SNBP1/2[3/16]22[1/2] Ea. Add
SNBP1/2-33 ga.33[1/2] Ea. Add
SNBP3/4[5/16]2[3/4]2[3/4][3/4] Ea. Add
SNBP3/4-33 ga.33[3/4] Ea. Add
SNBP3/8-2[3/16]22[3/8] Ea. Add
SNBP5/8[1/4]2[1/2]2[1/2][5/8] Ea. Add
SNBP5/8-2[3/16]22[5/8] Ea. Add
SNBP5/8-33 ga.33[5/8] Ea. Add
SNBP5/8SKT3ga.42[5/8] Ea. Add
SNBP7/8[5/16]33[7/8] Ea. Add
SNBP7/8-2[3/8]1[15/16]2[1/4][7/8] Ea. Add