"• Size Range: 1"" through 30""

• Material: Cast iron roll and sockets, steel roll rod

• Finish: Plain, Galvanized or Resilient Coated

• For suspension of pipe from two rods where longitudinal expansion and contraction may occur

• Complies with Federal Specification A-A-1192A (Type 41),

WW-H-171-E (Type 42), ANSI/MSS SP-69 and MSS SP-58 (Type 41)

• Adjustment: Adjustable socket permits vertical adjustment at the roll

• Maximum Temperature: 450° F at roller, 300° F at resilient coated roller

• How to size: If the roll is to support non-insulated pipe, select the size directly from nominal pipe

size (column 1) in table below. If used with pipe covering protection saddle, contact Edge for sizing of pipe roll.

• Features: Provides for vertical adjustment; nut at bottom of hanger rod fits into the socket preventing loosening or

• Pipe roll is designed for two point surface contact with pipe or saddle

• Features: Advantages of pipe rollers with a protective resilient coated covering.

• Non conductive pipe rollers - prevent the passing of current from pipeline to structure

• Corrosion resistant - for protection against severe weather conditions, moderate corrosive conditions such as marine atmospheres and weather resistant to ultra-violet radiation

• Low coefficient of friction between pipe and resilient coated pipe roller.

• Specify pipe roll size. Order should include figure number, name and finish in all cases

• Hanger rods and nuts to be ordered separately

• Be certain to order oversized rolls when insulation and protection saddles makes this necessary

• Max Load Ratings (lbs.): 1”-2” (600), 2-1/2” (660), 3” (700), 3-1/2”-5”(750), 6” (1,070), 8” (1,350), 10”(1,730), 12” (2,400), 14” (3,130), 16” (3,970), 18” (4,200), 20” (4,550), 24” (6,160), 30” (7,290)"

Scroll down for full product description